Português 🇧🇷 | English 🇺🇲
The Frusrite Deluxe is a limited and commemorative version of the Frusrite, a project inspired ny the germanium Mosrite Fuzzrite, which only 250 units were made between 1965 and 1966. The Frusrite circuit is faithful to the first version of the fuzz pedal developed by Ed Sanner. The Frusrite Deluxe has the same measurements as the original enclosure, and also a very special NOS japanese germanium transistors combination. We also added improvements to the circuit which brings convenience to the use on the modern days, without interfering the tone.
Your Frusrite Deluxe has an internal polarity conversion to handle the germanium transistors - Hitachi 2SA12 e Matsushita 2SA102 - (checked one by one), with the possibility to be powered with a 9V battery.
ATTENTION: It’s not necessary removing the battery when using a power supply. We recommend unplugging the input cable (INST.) wh n not playing, so the battery will not be lowered and will last long.
It has a True Bypass switch, ON/OFF red LED , 1% tolerance resistors, polyester capacitors to reduce hum and inaccuracies (the original had ceramic capacitors which are inaccurate and helps hum and static sounds), excellent jacks, and most importantly: a very clean build, 100% handmade with care and zeal, keeping the feel and look of a vintage pedal, which we admirers love and seek.
John Frusciante used the germanium Fuzzrite V1 on the Red Hot Chili Peppers, for the Stadium Arcadium tour between 2006 and 2007, and also on his solo album The Empyrean (2009).
JOHN FRUSCIANTE’S FAVORITE SETTING
HOW TO BUY?
The Frusrite Deluxe is a limited edition which only had sixteen units (#000 to #015) - only ten (#006 to #015) were made to be sold in October 2022.
Value:- PayPal: US$ 239 + shipping
PHOTOS:
TECHNICAL INFORMATION:
Alimentação: Fonte de 9V centro negativo com conector P4 ou suporte interno para bateria 9VConsumo: 9mA (9V DC)Controles: Depth e VolumeIndicador: Led vermelho 5mm para indicar o efeito ligado ou desligadoConexões: Inst. (Input), Amp. (Output), conector P4 para fonte e suporte interno para bateria 9VDimensões:- Comprimento (com knobs): 17cm- Largura seção maior: 10cm- Largura seção menor: 8,6cm- Altura seção maior: 4,6cm- Altura seção menor: 3,3cm- Altura na posição do footswitch: 5,2cmPeso: 380g
VIDEO: